top of page
OSPK-FG-FINAL.png

Our Luna Orange speaker cable benefits from a more complex architecture compared to the Gris, with two hand-braided LCNV 18 gauge conductors for a total of 15 gauge per polarity. This speaker cable can be an excellent choice for subwoofers and is available with banana, spade, and SpeakON connectors.

OJMP-FG.png

Our Orange jumper cables are comprised of two LCNV 18 gauge conductors also available with banana or spade connectors.

XLR

Our Luna Orange XLR interconnect cable is comprised of one LCNV 22 gauge conductor per polarity. A braided tinned copper shielding is used to restrict electromagnetic and radio frequency interactions. These cables can be used with SUTs and turntables without interference. Available with RCA, XLR, and DIN connectors.

RCA

Our Luna Orange RCA interconnect cable is comprised of one LCNV 22 gauge conductor per polarity. A braided tinned copper shielding is used to restrict electromagnetic and radio frequency interactions. These cables can be used with SUTs and turntables without interference. Available with RCA, XLR, and DIN connectors.

Phono Cables

With the same basic design as our Orange RCA interconnect cable, the Luna Orange phono tonearm cable is available with a straight or 90 degree plug. The attached ground cable is comprised of two LCNV 18 gauge conductors. 

Phono ground

The Luna Orange phono ground is comprised of two LCNV 18 gauge conductors. 

Luna Cables USB cable

Our Luna Orange USB cable is comprised of four LCNV 22 gauge conductors. Both the signal and voltage pairs of conductors are shielded from each other and then a supplemental layer of braided tinned copper is applied over the whole in order to restrict electromagnetic and radio frequency interactions, protecting the fragile digital signal. Unlike most other USB cables on the market, our connectors are soldered by hand for a better contact and performance. Available with A, B, and C type connectors.

Digital Cable

Our Luna Orange digital RCA and BNC cables are comprised of two LCNV 22 gauge conductors. AES/EBU digital cables are comprised of three LCNV 22 gauge conductors. A braided tinned copper shielding is used to restrict electromagnetic and radio frequency interactions.

Ethernet cable

Our Luna Orange Ethernet cable is comprised of eight LCNV 22 gauge conductors, chosen for their performance and long-term durability. Four twisted pairs are enveloped with a braided tinned copper shielding to restrict electromagnetic and radio frequency interactions, protecting the fragile digital signal.
Unlike most other ethernet cables on the market, our top quality Telegartner connectors are soldered by hand for a better contact and performance. 

OPWR-FG.png

Our Luna Orange AC power cable is comprised of 14 gauge tin-plated copper conductors, chosen for their long-term electrical stability, while providing sonic focus. The rubberized dielectric absorbs micro vibrations to control resonance while minimizing electromagnetic interactions.  Dielectric paper envelops a rubberized material chosen for its absorption qualities. A tinned copper braided shielding is also used to restrict electromagnetic and radio frequency interactions. The outer insulation is also rubberized. Finally, as with all our cables, the outer jacket is made of unbleached 100% cotton, chosen for its flexibility and supplemental damping of resonance.

Cryogenically treated Wattgate connectors are used to ensure a reliable and secure connection.

The Orange power cable distinguishes itself from the Gris because of its larger gauge and a more substantial insulation throughout.  

Digital Cable

Our Luna Orange DC cable is comprised of two LCNV 22 gauge conductors. A braided tinned copper shielding is used to restrict electromagnetic and radio frequency interactions. 

ORANGE SUT

Through the manipulation of impedance, Luna Cable's Orange step-up transformer will add gain without noise or grain.  When compared to active head amps, it delivers lower distortion, particularly in higher frequencies, allowing for a richer and more refined sound.  

READ MORE +

OSUT-FB-FACE-png_edited.jpg
  • Instagram
  • Twitter
  • Facebook
  • YouTube
copyright 2020 luna.png

This website is a representation of our most popular products. We can build almost any cable suitable for your recording  studio, home theatre, stereo system, DJ station and headphone set. If the cable or the type of connector you are looking for is not on the website, simply make a request to your local dealer or contact us directly to confirm the availability.   

bottom of page