Our Luna Rouge speaker cable is comprised of a combination of six braided LCNV 18 gauge and two interwoven LCNV 22 gauge conductors, for a total of 13 gauge per polarity. A braided tinned copper shielding is used to restrict electromagnetic and radio frequency interactions. Finally, the hand-engraved anodized aluminum modules are installed for stability at the crucial split to the positive and negative contact points. Each cable is then terminated with cryogenically-treated low-mass rhodium plated banana and/or spade connectors for ease of signal transfer.
Our Luna Rouge XLR interconnect cable is comprised of two LCNV 22 gauge conductors and one cotton and oil dielectric 26 gauge solid silver conductor per polarity. Two LCNV 22 gauge conductors are used for the neutral connection. A supplemental cotton insulator is applied between the conductors and the tinned copper shielding, further minimizing any disturbance of the conductors' magnetic field. A braided copper shielding is used to restrict electromagnetic and radio frequency interactions.
Our Luna Rouge RCA interconnect cable is comprised of two LCNV 22 gauge conductors per polarity and one cotton and oil dielectric 26 gauge solid silver conductor per polarity. A supplemental cotton insulator is applied between the conductors and the tinned copper shielding, further minimizing any disturbance of the conductors' magnetic field. A braided copper shielding is used to restrict electromagnetic and radio frequency interactions. Also available with DIN connectors.
Our Luna Rouge USB cable treats the signal and DC power communications differently. The signal section is made with eight single strands of oil impregnated cotton dielectric 26 gauge solid silver conductors, four per polarity. A supplemental layer of cotton is applied to each signal quartet before they are twisted. The DC voltage section uses two LCNV 18 gauge conductors. Both the signal and voltage pairs of conductors are twisted and shielded from each other. A supplemental layer of braided tinned copper is applied over the whole in order to restrict electromagnetic and radio frequency interactions, protecting the fragile digital signal. Unlike most other USB cables on the market, our connectors are soldered by hand for a better contact and performance. Available with A, B, and C type connectors.
Our Luna Rouge digital RCA/BNC cable is comprised of three LCNV 22 gauge conductors per polarity and two cotton and oil dielectric 26 gauge solid silver conductors. Covered with an additional natural cotton jacket, these conductors are then shielded and twisted together.
An extra braided tinned copper shielding is also used to restrict electromagnetic and radio frequency interactions, protecting the fragile digital signal.
Our Luna Rouge Digital AES/EBU cable is comprised of three LCNV 22 gauge conductors per polarity and three cotton and oil dielectric 26 gauge solid silver conductors. Two LCNV 22 gauge conductors are used for the neutral connection.
Covered with an additional natural cotton jacket, these conductors are then shielded and twisted together.
A braided tinned copper shielding is used to restrict electromagnetic and radio frequency interactions, protecting the fragile digital signal.
ROUGE POWER
Our Luna Cables Rouge AC Power is comprised of new rubberized dielectric and insulation material with maximum absorption properties for ultimate resonance control. It also ensures that our cable is supple and ergonomic. For sturdy conductivity, we use 315 strands of Luna Cables Neo-Vintage (LCNV) tinned copper conductors for a total of ten gauges per polarity. The power cord is also double-shielded with tinned copper jackets to restrict electromagnetic fields and other frequencies from interfering with the audio components.
Finally, we use Rhodium AC plugs for the best possible contact.
Our new AC cord’s sound pushes back the boundaries of everything we have previously built as part of our “power family”, all the while respecting the Rouge series’s signature sound that users love so much.
